CHIPVAC 400 continuos duty patented industrial vacuum cleaner for dust, liquid and solid material

Suction unit:

The suction is provided by a suction unit side channel blower type, with direct coupling between the fan and the motor shaft and no transmission system. It is thus completely maintenance free, fit for round-the-clock 24 hours duty, very silent and provides outstanding suction performances.
The machine is equipped with a metallic Electrical panel produced as per CE standards with Neoprene rubber cable 10 mt with 32amp plug with delta star triangle start.
The turbine is equipped with a secondary safety cartridge filter for protection of the same. The turbine is equipped with a Negative pressure relief valves. In case of completely closed suction hose, the valve provides cooling of the turbine through the environment air inlet.

Filter unit:

The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with stars in order to increase the filter surface (3 m2), and has a high filtration efficiency (3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material, with no need to change or take out the filter.

The vacuumed material is placed inside a large container mounted on wheels (400 lt. of capacity), which makes it possible to dispose easily and safely of the sucked material thanks to the front discharge.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes, and with forklift intakes. All the metal parts of the vacuum are epoxy painted. Industrial construction 4mm of thickness.
With the aid of a forklift is simplified the operation of empting the vacuumed materials like Metal chips or heavy materials. It is possible to introduce a metal grid for the separation of metal chips which remain in the upper part and the liquids (like oils) that will stay in the lower part of the container. A 1”1/2 discharge valve is available to empty the liquids container.