Search

Proportional Dosing Systems for Water Treatment

Easy to use

No power supply needed

Virtually maintenance-free

Simple installation

Adjustable to any desired setting

For water flow of 3.0m³/h at 0.3-6 bar pressure

Connected to the water system, the Dosatron uses only the water pressure as its driving force. In this way, it draws in the concentrate, dilutes it to the desired percentage and mixes it with the water flowing through the unit. The quantity of the product added is always proportional to the water flow, even in the case of flow or pressure fluctuations.

Injection Range:  1 - 10 % [1:100 - 1:10]

Water flow range: 10 l/h - 3 m3/h

Operating pressure:  0.5 - 6 bar

Concentrated additive injection:  0.1 l/h - 300 l/h

OIL MIST COLLECTION, OIL MIST FILTRATION SYSTEM, DUST COLLECTION

Galileo Plus is a centrifugal oil mist filter for mist generated from neat oil and emulsions used in machine tools, also suitable in the presence of particulate. It is designed to be mounted to the machine tools.

* Grants a high-efficiency filtration
* Long lasting filters
* Very low electrical consumption
* Easy mounting
* Innovative design

High quality ultrasonic cleaner with a high ultrasonic effect for reliable parts cleaning every day. Suitable for many tasks.

Digital multifunction display

Setting of time and temperature
Powerfunction – setting of frequency and watt-usage
Multifrequency, Choose between 21,5 or 40 khz.

Volume: 16 L 

Tank size (LxWxH): 325x300x190 mm

Basket size: 250x245x150 mm

Outside dimensions: 420x330x420 mm

Ultrasonic effect: 320W

Frequency: 21,5 / 40 Khz

Temperature: 0-80°C

Power supply: 220/240V, 50 hz.

DMD is a rotating magnetic discs separator for coolants used during industrial machining contaminated by magnetic particles.

DMD series is available in 7 standard models for flowrates ranging from 50 to 400 l/min of emulsion and from 25 to 200 l/min of neat oil.

Detex is a flat bed coolant filter, using nonwoven fabric for eliminating magnetic and nonmagnetic particles from neat oil and emulsion. Filtration degree can be determined by the choice of the fabric, ranging from 10 to 50 micron, granting the highest level of filtration. Detex is available in 12 sizes, with a flowrate capacity from 50 to 400 l/min of emulsion and from 25 to 200 l/min of neat oil. 

No tank, no electrical board, no pump.

Fabric filtration guarantees a high filtration efficiency with a limited initial investment.

The suction is developed by two single-phase by-pass motors with carbon-brushes. These motors are protected inside a steel motor head, containing a sound absorbing material that minimizes noise during the service. The control panel located on the motor head has two independent switches, an indicator of clogged filter with light, that warns when the maximum level get reached and the switch of the electric and independent pump. You may find two handles located on the motor head, which allow to lift it easily to proceed to an inspection or for an easy emptying of the basket containing the metal chips collected,

There are two filters inside the filtering steel chamber: a fiber filter and a filter PPL, 300 microns, perfect to resist to the most abrasive oils. The suction system with inlet,  50, positioned below the filter allows to vacuum simultaneously solids and liquids (oils, lubricants, emulsions, metal chips, metal grain...)

The vacuumed material is separated instantly : the metal chips are collected in a galvanized sieve grid easily extractable, which allows a rapid disposal of its content. The finer shavings are retained by a second grid with filter PPL 300 micron, which purifies the oil/emulsion from any impurity. The oil passes through the grid and naturally falls, perfectly filtered, in the container.
This vacuum is equipped as standard with a manual drain valve and an electric pump which has a flow rate of 100 lts per minute. The collection unit incorporates an electronic floating device which stops the suction when the maximum level of the container has been reached.
This vacuum cleaner is made of a sturdy steel, equipped with non-marking wheels and brakes.

Advantages

Innovation
* The most compact vacuum cleaner for the cleaning of tanks in the mechanic industry
* Removable steel grid for the retention of metal shavings

Economic saving
* Collection and reuse of lubricants 
* Perfect to vacuum medium quantities of material

Time saving
* Reduction of downtime
* Reduction of cost maintenance